Single Shot Grease Progressive Lubication System

Product Price :Get Latest Price

This is a lubricating device meant for ejecting established amount of grease on each full stroke of handle.

On pushing handle of pump, grease is ejected out from the outlet of the pump under pressure. On pulling the handle, suction port of the cylinder gets filled with the grease. Spring pressure through follower plate exerted over the top surface of the grease (filled in the reservoir) further helps to push the grease in the suction port.

Pump has its own reservoir for storage of grease. It has transparent acrylic reservoir. Grease can be filled into the reservoir either by opening top lid or through the filling port provided at the side of the body. Pump has wall mounted construction.

To check reverse flow of grease, a non return valve is put in the system at the outlet port.

Product Price :Get Latest Price

The availabe model is Manual Grease Pump- Model AHGP-700/CLHA-50. This pump has its own reservior made of Acrylic. It is piston pump where piston is actuated by a cam, integral with the handle of pump. On operating the handle, pump discharges grease from outlet. As soon as the pulling force on the handle is released, pump returns back by spring force.

For filling grease into the reservior an appropiate port is provided.

There is a cup seal along with spring which positively pushes the grease into the suction port of the pump.

Tellatale rod indicator grease level in reservoir( in case of steel reservoir).

Product Price :Get Latest Price

The availabe model is Model PNGP 15-10. This pump is pneumatically operated. It has its own reservior made of Acrylic. Input pneumatic pressure approximate 5-6kg/cm2. Mounting of pump is through 2 holes. Filling of the grease is done through proper port provided at the housing. Spring loaded cup is provided in the resevoir for positive suction of grease.

Telltale rod is provided (optional) for grease level sensing electricall with the help of limit switch. For adjusting the output of the grease discharge an adjusting screw is provide (as optional).

Product Price :Get Latest Price

This is a compact pumping station. A motor of 220V, 50Hz, 40W is operated, giving continuous NLG-I/II greasing at the outlet of the pump. The reservoir is built-in with the pump. Pump can develop pressure of 100 kg/cm2. The discharge is of the order of 60 gm/minute. This pump is suitable for, single line progressive greasing system/ grease dispensing system for auto components. Normally this system runs periodically or run as per machine requirements.

Outlet port size : Suitable for 6mm OD tube.

Specifications:

Product Price :Get Latest Price

Pump is pneumatically operated i.e. through pneumatic line, connected to the ports of cylinder. The cylinder is built in with the pump. During ON period of the pneumatic line, piston inside the cylinder is pushed, ejecting out pressurized grease from the outlet port of the pump body. During reverse flow of pneumatic line, grease is sucked through the suction port in the pump. Spring force through follower plate exerted on the top surface of the grease (filled in the reservoir) makes the suction of the grease positive and easier. The grease thus filled in cylinder is ready for ejection. Pump is mounted on machine frame.

Suitable for grease upto NLGI-II. Grease is filled through filling port provided on the body.

Outlet port size : 1/4" BSP