Send Email
Send SMS
Search
S. K. Engineers
S. K. Engineers


Centralized Lubrication System

Pioneers in the industry, we offer hand pump without reservoir, hand pump with reservoir, mini motorized lubrication unit, motorized lubrication unit and pneumatically operated from India.

Hand Pump without Reservoir

REQUEST CALLBACK

Hand Pump without Reservoir
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

This is a simple pump meant for delivering oil in lubrication line. It is ideally suited for general purpose machine, where
pump can be inserted into oil reservoir of the machine or can be mounted separately in machine casing below
the reservoir.

The pump is actuated by hand pull and release ofhandle for as many times as per lubrication requirement. It is advisable to attach a suction strainer before the inlet of the pump to avoid damage to pump's piston.

This strainer is supplied as optional accessory. Relief valve, if required, is available as optional accessory

  • Pressure : 15 Kg/cm2
  • Discharge : 7 cc per stroke
  • Suitable for direct connection of 6mm O.D. Tube
Yes! I am interested

Hand Pump with Reservoir

REQUEST CALLBACK

Hand Pump with Reservoir
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

This pump has its own reservoir made of ACRYLIC. It is piston type, where piston is actuated by a cam, integral with the handle of the pump.

On operating the handle, pump discharges oil. As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq.cm. and so on.

There is an in-built check valve and pressure reducing system incorporated in the pump. Pump is also equipped with relief valve, which safeguards it from overloading.

The acrylic body of pump facilitates the crosschecking of the level of oil in the pump and to refill the reservoir from the top opening, once the oil level is nearing the minimum point.

Pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir.

Suitable mounting holes are provided for vertical mounting of the pump. Pump outlet is suitable for 6 mm dia tube.

  • Pressure : 15 Kg/cm2
  • Discharge : 4 cc per stroke
  • Reservoir : 250 cc
  • Material of
  • Reservoir: Accrylic
Yes! I am interested

Hand Pump with Reservoir

REQUEST CALLBACK

Hand Pump with Reservoir
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

This pump has its own reservoir. It is piston type, where piston is actuated by a cam, integral with the handle of the pump. On operating the handle, pump discharges oil.

As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the Lubrication line is reduced to 1kg/sq.cm. and so on.

There is an in-built check valve and pressure reducing system incorporated in the pump. Pump is also equipped with relief valve, which safeguards it from overloading.

Pump is also fitted with an oil window to crosscheck the level of oil in the pump and to refill the reservoir from the top opening, once the oil level is nearing the minimum point.

Pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir. Suitable mounting holes are provided for vertical mounting of the pump.

Pump outlet is suitable for 6 mm dia tube.

  • Pressure : 15 Kg/cm2
  • Discharge : 4 cc per stroke
  • Reservoir : 250 cc
  • Material of
  • Reservoir: Aluminum Casting
Yes! I am interested

Hand Pump with Reservoir

REQUEST CALLBACK

Hand Pump with Reservoir
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

This pump has its own reservoir. It is piston type, where piston is actuated by a cam, integral with the handle of the pump.
On operating the handle, pump discharges oil.

As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq.cm. and so on.

There is an in-built check valve and pressure reducing system incorporated in the pump. Pump is also equipped with relief valve, which safeguards it from overloading.

Pump is also fitted with an oil window to crosscheck the level of oil in the pump and to refill the reservoir from the top opening, once the oil level is nearing the minimum point.

Pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir. Suitable mounting holes are provided for vertical mounting of the pump.

Pump outlet is suitable for 6 mm dia tube.

  • Pressure : 15 Kg/cm2
  • Discharge : 4 cc per stroke
  • Reservoir : 250 cc
  • Material of
  • Reservoir: Acrylic
Yes! I am interested

Hand Pump with Reservoir

REQUEST CALLBACK

Hand Pump with Reservoir
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

This pump has its own reservoir made of Aluminum Die Casting, where the mounting holes are projected
on the side.

It is piston type, where piston is actuated by a cam, integral with the handle of the pump. On operating the handle, pump discharges oil.

As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq.cm. and so on.

There is an in-built check valve and pressure reducing system incorporated in the pump. Pump is also equipped with relief valve, which safeguards it from overloading.

Pump is also fitted with an oil window to crosscheck the level of oil in the pump and to refill the reservoir from the top opening, once the oil level is nearing the minimum point.

Pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir. Suitable mounting holes are provided for vertical mounting of the pump, projected outside the back wall of the pump.

Pump outlet is suitable for 6 mm dia tube.

  • Pressure : 15 Kg/cm2
  • Discharge : 6 cc per stroke
  • Reservoir : 600 cc
  • Material of
  • Reservoir : Aluminium die casting with
  • Casting with project
  • mounting holes on sides.
Yes! I am interested

Hand Pump with Reservoir

REQUEST CALLBACK

Hand Pump with Reservoir
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

This pump has its own reservoir. It is piston type, where piston is actuated by a cam, integral with the handle of the pump.
On operating the handle, pump discharges oil. As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq.cm. and so on.

There is an in-built check valve and pressure reducing system in corporated in the pump. Pump is also equipped with relief valve, which safeguards it from overloading.

The total pump is made out of S.S. Material i.e.body of the pump is S.S., piston and cylinder in S.S. while the rubber parts are viton. Suitable mounting holes are provided for vertical mounting of the pump.

Pump outlet is suitable for 6 mm dia tube.

The pump is suitable for water operation as well as other chemicals.

  • Pressure : 48 Kg/cm2
  • Discharge : 10 cc per stroke
  • Reservoir : 2000 cc
  • Material of
  • Reservoir: Stainless Steel
  • Rubber Parts : Viton
Yes! I am interested

Mini Motorized Lubrication Unit

REQUEST CALLBACK

Mini Motorized Lubrication Unit
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

This is mini hydraulic power pack fitted with a motor and rotary positive displacement pump. The unit is designed for intermittent run only and is best suited for Single Shot Lubrication. Unit is fitted with a suitable pressure switch, float switch and a transparent reservoir (for visually checking the oil level).

During ON cycle, the electrically driven pump discharges the oil with high pressure, adjustable between 10-20 bars, with the help of an in-built relief valve, which is also safeguarding the system from over–loading and the pressure can be read on the Pressure Gauge fitted on the unit.

During OFF cycle the pressure in the lubrication line is reduced to 1 kg/sq.cm. and so on.

The system is also provided with a Bleed Valve near the outlet port to automatically bleed air if entrained in system. For vertical mounting of the unit, two holes are provided at the back of the system. There is an inbuilt check valve and pressure reducing system incorporated in the pump.

Unit is supplied with an adoptor (outlet port) of M10x1 tapping, fitted with a locking screw and a cone (ferrule), suitable for 6mm OD tube.

  • Discharge of Pump : 150 cc / min.
  • Reservoir Capacity : 1.8 ltr in polycarbonate material
  • Motor : 25 W, Single Phase, 220 V / 110 V
  • Relief Valve : Pre set at 15 kg/sq.cm.
  • Pressure Switch : (optional)
  • Digital Timer : (optional)
  • Float Switch : (optional)
  • Suitable oil Viscosity: Between 32 to 460 cSt / 40 degrees celcius
Yes! I am interested

Motorized Lubrication Unit

REQUEST CALLBACK

Motorized Lubrication Unit
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

This is mini hydraulic power pack fitted with a motor and rotary positive displacement pump. The unit is designed for intermittent run only and is best suited for Single Shot Lubrication.

Unit is fitted with a suitable pressure switch, float switch and a transparent reservoir (for visually checking the oil level).

During ON cycle, the electrically driven pump discharges the oil with high pressure, adjustable between 10-20 bars, with the help of an in-built relief valve, which is also safeguarding the system from over–loading and the pressure can be read on the Pressure Gauge fitted on the unit.

During OFF cycle the pressure in the lubrication ine is reduced to 1 kg/sq.cm. and so on.

The system is also provided with a Bleed Valve near the outlet port to automatically bleed air if entrained in system.

For vertical mounting of the unit, two holes are provided at the back of the system. There is an inbuilt check valve and pressure reducing system incorporated in the pump.

Unit is supplied with an adoptor (outlet port) of M10x1 tapping, fitted with a locking screw and a cone (ferrule), suitable for 6mm OD tube.

  • Discharge of Pump : 250 cc / min.
  • Reservoir Capacity : 3.0 ltrs. in Polycarbonate Material
  • Motor : 40 W, Single Phase, 110 / 220 V
  • Relief Valve : Pre set at 20 kg/sq.cm.
  • Pressure Switch : Built in Float Switch : Built in Suitable oil
  • Viscosity: Between 32 to 680 cSt / 40degrees celcius
Yes! I am interested

Motorized Lubrication Unit

REQUEST CALLBACK

Motorized Lubrication Unit
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

This is a mini hydraulic power pack fitted with a motor and rotary positive displacement pump. The unit is designed for intermittent run only and is best suited for Single Shot Lubrication.

Unit is fitted with a suitable pressure switch, float switch and oil window for checking oil level. During ON cycle, (5 sec. fixed), the electrically driven pump discharges the oil with high pressure, adjustable between 10-20 bars, with the help of an in-built relief valve, for safeguarding the system from over–loading and the pressure can be read on the Pressure Gauge fitted on the unit.

During OFF cycle (any time more than 2 minutes -adjustable) the pressure in the lubrication line isreduced to 1 kg/sq.cm. and so on.

The system is also provided with a Bleed Valve near the outlet port to automatically bleed air if entrained in system.

For vertical mounting of the unit, four holes are provided at the back of the system. There is an inbuilt check valve and pressure reducing system incorporated in the pump.

Unit is supplied with an adoptor (outlet port) of M10x1 tapping, fitted with a locking screw and a cone (ferrule), suitable for 6mm OD tube.

  • Discharge of Pump: 1 L.P.M.
  • Reservoir Capacity3.0 ltrs.
  • Motor : 0.12 KW, 3 phase, 4 pole, 415 V, 50 Hz
  • Relief Valve : Pre set at 15 kg/sq.cm.
  • Pressure Switch (CE) : 24 V (Max), 0.1 A (Max), Pre-
  • Set at 12 kg/cm2 1NO Contact
  • Float Switch : 42 V(Max), 0.1 A (Max)(Vertical reed type)
  • Pressure gauge : 0-25 kg/cm2 Suitable oil
  • Viscosity: Between 32 to 220 cst/40c
Yes! I am interested

Motorized Lubrication Unit

REQUEST CALLBACK

Motorized Lubrication Unit
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

This is a mini hydraulic power pack fitted with a motor and rotary positive displacement pump. The unit is designed for intermittent run only and is best suited for Single Shot Lubrication.

Unit is fitted with a suitable pressure switch, float switch and oil window for checking oil level.

During ON cycle, the electrically driven pump discharges the oil with high pressure, adjustable between 18-20 bars, with the help of an in-built relief valve, for safeguarding the system from over– loading.

During OFF cycle the pressure in the lubrication line is reduced to 1 kg/sq.cm. and so on.

The system is also provided with a Bleed Valve near the outlet port to automatically bleed air if entrained in system. For vertical mounting of the unit, four holes are provided at the back of the system.

For Vertical mounting of the unit, four holes are provided at the back of the system.

There is an in-built check valve and pressure reducing system incorporated in the pump.

Outlet port is suitable for 6mm OD tube.

  • Discharge of Pump : 1 L.P.M.
  • Reservoir Capacity : 5 ltrs.
  • Motor : 0.12 KW, 1500 rpm, 3 Phase, 415 V
  • Relief Valve : Pre set at 18-20 kg/sq.cm.
  • Pressure Switch : 220 V (Max), 1 Amp (Max),
  • Pre set at 15kg/sq. cm 1 NO+ 1 NC contact.
  • Float Switch : 220 V (Max.) 0.2 Amp (Max.)
  • with 1 NC Contact (Oil filled) Suitable oil
  • Viscosity: Between 32 to 680 cst/40c
Yes! I am interested

Motorized Lubrication Unit

REQUEST CALLBACK

Motorized Lubrication Unit
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

This is a mini hydraulic power pack fitted with a motor and rotary positive displacement pump. The unit is designed for intermittent run only and is best suited for Single Shot Lubrication.

Unit is fitted with a suitable pressure switch, float switch and oil window for checking oil level.

During ON cycle, the electrically driven pump discharges the oil with high pressure, adjustable between 18-20 bars, with the help of an in-built relief valve, for safeguarding the system from over–loading.

During OFF cycle the pressure in the lubrication line is reduced to 1 kg/sq.cm. and so on.

The system is also provided with a Bleed Valve near the outlet port to automatically bleed air if entrained in system.

For vertical mounting of the unit, four holes are provided at the back of the system.

There is an in-built check valve and pressure reducing system incorporated in the pump.

Outlet port is suitable for 6mm OD tube.

  • Discharge of Pump : 1 L.P.M.
  • Reservoir Capacity : 5 ltrs.
  • Motor : 0.12 KW, 1500 rpm, 3 Phase, 415 V
  • Relief Valve : Pre set at 18-20 kg/sq.cm.
  • Pressure Switch : 220 V (Max), 1 Amp (Max), Pre
  • set at 15kg/sq. cm 1 NO + 1 NC contact.
  • Float Switch : 42 V (Max.) 0.2 Amp (Max.)
  • with 1 NC Contact (Oil filled)Suitable oil
  • Viscosity : Between 32 to 680 cst/40c
Yes! I am interested

Pneumatically Operated

REQUEST CALLBACK

Pneumatically Operated
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

It is pnematically operated pump. Reservoir is of Metalic, Whenever compressed air is given to the pump at
the input port, piston moves up and discharges oil rom the outlet.

During OFF time of the compressed air, pump gets recharged, sucking oil from the reservoir.

Mounting of the pump is through 4 holes in vertical position. There is a built in relief valve in the pump to safeguard it from overloading.

There is a special pressure reducing valve provided with the pump to bring down the pressure towards"O" during OFF time.

  • Input air pressure : 5-6 Kg/cm2
  • Output OilPressure: 18 Kg/cm2
  • Discharge of Oil
  • Reservoir Capacity: 10 cc per stroke 3liters Material of reservoir Suitable oil
  • viscosity: Mild Steel Between 32 to 680 cSt/40 Deg C
Yes! I am interested

Pneumatically Operated

REQUEST CALLBACK

Pneumatically Operated
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

It is pnematically operated pump. Reservoir is of Aluminium. Whenever compressed air is given to the pump at the input port, piston moves up and discharges oil rom the outlet.

During OFF time of the compressed air, pump gets recharged, sucking oil from the reservoir.

Mounting of the pump is through 4 holes in vertical position. There is a built in relief valve in the pump to safeguard it from overloading.

There is a special pressure reducing valve provided with the pump to bring down the pressure towards "O" during OFF time.

  • Input air pressure : 5-6 Kg/cm2
  • Output Oil Pressure: 18 Kg/cm2 Discharge of Oil
  • Reservoir Capacity: 10 cc per stroke 1.7liters
  • Material of rservoir Suitable oil viscosity : Aluminium casting
  • Between 32 to 680 cSt/40 Deg C
Yes! I am interested

Pneumatically Operated

REQUEST CALLBACK

Pneumatically Operated
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

It is pnematically operated pump. Reservoir is of Aluminium. Whenever compressed air is given to the pump at the input port, piston moves up and discharges oil rom the outlet.

During OFF time of the compressed air, pump gets recharged, sucking oil from the reservoir. Mounting of the pump is through 4 holes in vertical position.

There is a built in relief valve in the pump to safeguard it from overloading. There is a special pressure reducing valve provided
with the pump to bring down the pressure towards "O" during OFF time.

  • Input air pressure : 5-6 Kg/cm2
  • Output Oil Pressure: 15 Kg/cm2 Discharge of Oil
  • Reservoir Capacity : 6 cc per stroke 600 cc
  • Material of rservoir Suitable oil
  • viscosity: Aluminium casting Between 32 to 680 cSt/40 Deg C
Yes! I am interested

Motorized Lubrication Unit

REQUEST CALLBACK

Product Price :Get Latest Price

This is mini hydraulic power pack fitted with a motor and rotary positive displacement pump. The unit is designed for intermittent run only and is best suited for Single Shot Lubrication.

Unit is fitted with a suitable pressure switch, float switch and a transparent reservoir (for visually checking the oil level).

During ON cycle, the electrically driven pump discharges the oil with high pressure, adjustable between 15-20 bars, with the help of an in-built relief valve, which is also safeguarding the system from over–loading.

During OFF cycle the pressure in the lubrication line is reduced to 1 kg/sq.cm. and so on.

The system is also provided with a Bleed Valve near the outlet port to automatically bleed air if entrained in system.

For vertical mounting of the unit, two holes are provided at the back of the system.

There is an inbuilt check valve and pressure reducing system incorporated in the pump.

Outlet port is suitable for 6mm OD tube.

  • Discharge of Pump : 0.70 LPM
  • Reservoir Capacity : 2.7 ltrs.(in translucent PP Material)
  • Motor : 0.09KW, 4 Pole, 1500 RPM, 3
  • Phase, 415 V
  • Relief Valve : Pre set at 15-20 kg/sq.cm.
  • Pressure Switch : 42 V (Max), 0.2 A (Max), Pre -
  • set at 12 kg/sq. cm, 1
  • NO+1NC Contact
  • Float Switch : Reed type vertical 42 V (Max),
  • 0.2 A (Max) with 1 NC
  • Contact (Oil Filled)Suitable oil
  • Viscosity: Between 32 to 680 cSt / 40 degrees celciusModel LUB


Yes! I am interested

Motorized Lubrication Unit

REQUEST CALLBACK

Product Price :Get Latest Price

This is a mini hydraulic power pack fitted with a motor and rotary positive displacement pump. The unit is designed for intermittent run only and is best suited for Single Shot Lubrication.

Unit is fitted with a suitable pressure switch, float switch and oil window for checking oil level. During ON cycle, the electrically driven pump discharges the oil with high pressure, adjustable between 10-20 bars, with the help of an in-built relief valve, for safeguarding the system from over– loading and the pressure can be read on the Pressure Gauge fitted on the unit.

During OFF cycle the pressure in the lubrication line is reduced to 1 kg/sq.cm. and so on.

The system is also provided with a Bleed Valve near the outlet port to automatically bleed air if entrained in system. For vertical mounting of the unit, four holes are provided at the back of the system. There is an inbuilt check valve and pressure reducing system incorporated in the pump.

Unit is supplied with an adoptor (outlet port) of M10x1 tapping, fitted with a locking screw and a cone (ferrule), suitable for 6mm OD tube.

  • Discharge ofPump: 1 L.P.M.
  • Reservoir Capacity : 3 ltrs. ( In Mild Steel)
  • Motor : 0.12 KW, 4 Pole,1500 rpm, 3
  • Phase, 415 V
  • Relief Valve : Pre set at 15-18 kg/sq.cm.
  • Pressure Switch : 42 V (Max), 0.2 Amp (Max),
  • Pre set at 12kg/sq. cm 1 NO+1 NC contact.


Yes! I am interested

 
X


Explore More Products

Contact via E-mail
Contact via SMS
S. K. Engineers
G. Swarajya Babu (Proprietor)
Plot No. 47, 1st Floor Technocrat Industrial Estate, T. I. E, Balanagar,
Hyderabad - 500037, Telangana, India
Call Us: 
Call Response Rate: 87%
Share Us :
F G T L



Home  |   Profile   |  Our Product Range  |  Site Map  |   Contact Us

© S. K. Engineers. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

S. K. Engineers